Sendix heavy duty H100 - Incremental encoders with optional mechanical speed switch or with dual encoders

The Sendix Heavy Duty H100 is an extremely rugged family of incremental encoders, available in 3 different versions – as encoders with or without speed switch or as dual encoders. The special HD-Safety-LockTM construction ensures that extremely high bearing load capacities of up to 300N axial and 400N radial can be achieved.

The typical temporary encoder overloads, caused for exam-ple by axial overload during installation or as a result of high vibration levels, can be tolerated to a large extent. This helps prevent premature damage to the encoder, as well as avoiding failure of the encoder in the field. It is thus ideally suited for heavy industrial usage, such as in steel works or in cranes. Even the harshest working conditions cannot harm the device, as these are exactly what it was designed to cope with.

The wide bearing clearance as well as the extra large robust flange bearings increase the load capacity and extend the service life. The floating bearing on the cover-side, in turn, eliminates internal stress. The revolving scanning unit ensures constant signal quality with extended temperatures; here the sensor unit is mechanically decoupled from the housing. Not only do the extremely wide temperature range from -40°C up to +100°C, the IP66 protection level and the sea-water-resistant materials all guarantee that the encoder is resistant to harsh environmental conditions, but additional security is provided by the dual seals on the shaft side - a friction seal against humidity and an additional labyrinth seal against dust ingress and to protect the friction seal from wa-ter jets. And finally the feather key shaft slot ensures perfect positive fitting to the application. However it is not just in the matter of its power of resilience that the Sendix Heavy-Duty encoder H100 more than meets the highest demands made of it, when it comes to functional-ity it also leaves nothing to be desired. The innovative plug-in spring terminal connectors in the terminal box enable simple and fast connection of the cable. This plug-in ability means that mounting of the encoder and electrical installation can be carried out separately.

Not only is installation in the field thus greatly simplified, but also, in turn, so is any replacement of the encoder during servicing. No tools are needed when connecting the cable to the spring terminal. Various simple connection options pre-sent themselves, thanks to the terminal box being pivotable through 180°. This offers a big advantage especially where space is tight, preventing any kinks in the cable. And last but not least, the H100 boasts a wide variety of available resolu-tions and switching speeds.

For more information
Kuebler Automation India Pvt. Ltd,
Plot No 677, Sr. No. 269/3, Bhugaon, Pune – 412 108.
Contact person : Tushar Joshi - Business Development Manager. Metal & Wind
Tel: +91-99707 33399, E-mail: tushar.joshi@kuebler.com, info@kuebler.in